XCMG XR460D Rotary Drilling Rig Broca Rotária
Feature
Max.pressure : 33Mpa
Max.pressureofvicepump
32Mpa :
Max.pressure : 33Mpa
Max.pressureofvicepump
32Mpa :
 |
XCMG Group |
|---|
Nome : XCMG
Serviços de telefone : 0086--516--87739285
Caixa de correio : jack-xie@xcmg.com
Endereço web : http://www.xcmg.com/en-us/
Endereço :
| Main technical parameters of XR320D | |||||||
|---|---|---|---|---|---|---|---|
| NO. | Name | Unit | Parameters | ||||
| 1 | Max. drilling diameter | mm | φ3000(3500) | ||||
| 2 | Max. drilling depth | m | 93(5-section of fricative) (standard) 71.5(4-section of mechanical interlock)(optional) 112 (6-section of fricative) | ||||
| 3 | Safe operation range(from rotarying centre) | mm | 4700-5000 | ||||
| 4 | Dimension in working condition(L×W×H) | mm | 12250×5500×28900 | ||||
| 5 | Dimension in transportation condition(L×W×H) | mm | Disassembly transportation | ||||
| 6 | Overall drilling weight(drilling tools not included) | t | 145 | ||||
| 7 | Engine | Engine model | CUMMINS QSX15-C600 | ||||
| Engine rated power/rotary speed | kW | 447/(2100r/min) | |||||
| 8 | Hydrulic system | Max. pressure | Mpa | 33 | |||
| Max. pressure of vice pump | Mpa | 32 | |||||
| 9 | Rotary drive | Max.output 1ff8 torque | kN.m | 460 | |||
| Rotary speed | rpm | 6～20 | |||||
| 10 | Pull-Down cylinder | Max. cylinder pressure | kN | 300 | |||
| Max. cylinder lifting force | kN | 400 | |||||
| Max. cylinder stroke | mm | 6000/10000 | |||||
| 11 | Main winch | Max. pulling force | kN | 520 | |||
| Max. wire speed | m/min | 60 | |||||
| 12 | Auxiliary winch | Max. pulling force | kN | 100 | |||
| Max. wire speed | m/min | 65 | |||||
| 13 | Mast | Left/ right Side | ° | 5/5 | |||
| Forwards | ° | 9/15 | |||||
| 14 | Slewing bearing | Slewing bearing angle | km/h | 360 | |||
| 15 | Runing | Max. complete device running speed | % | 1.5 | |||
| Max. complete device grade ability | 35 | ||||||
| 16 | Track | Track width | mm | 1000 | |||
| Outside width(min-max) | mm | 4050-5500 | |||||
| Distance between two wheels longitudinally | mm | 6050 | |||||
| Average grouning specific pressure | KPa | 117.5 | |||||
